The PM 200-1 BR/C
Formation rehabilitation in modular design
- The PM 200-1 BR/C is a machine for formation rehabilitation in modular design. This machine can be optionally used to completely renew ballast, clean ballast or produce grade 2 mixture from existing, old ballast in combination with track-bound formation rehabilitation. The PM 200-1 BR/C can be used in periods of possession of 7 hours and over. For more information, please download the PDF data sheet. Formation rehabilitation with complete renewal – PM 200-1 – Basic module
- Removal of ballast which cannot be recycled/cleaned and removal of the subgrade. Installation of new or externally recycled ballast and new formation layer in one operation. Formation rehabilitation with ballast cleaning: Removal of the old ballast and cleaning using the RM module – PM 200-1BR
- Removal of the subgrade, installation of new formation layer and the cleaned ballast in one operation. Formation rehabilitation with ballast recycling to form formation layer material – PM 200-1BR/C
- Removal of the ballast using the RM module. Ballast crushing using the conical crusher and mixing with new material to form the formation layer. The new ballast is installed in a separate operation.
complete renewal
Performance ø in 12 hours
220m
Max. performance per hour
30m
Subgrade Excavation Chain - Capacity
250 cbm/h
Excavation width
4.200 - 6.000 mm
Excavation depth max.
1.200 mm
Installation height, gravel/sand max.
500 mm (PSS/FSS)
Installation height, track formation layer
300 mm
Material supply (backwards)
BA 255
Evacuation (to the front)
MFS 40/100
BR with PSS
Performance ø in 12 hours
330m
Max. performance per hour
45m
Ballast Excavation Chain - Capacity
100 cbm/h
Excavation width
4.000 - 4.400 mm
Subgrade Excavation Chain - Capacity
350 cbm/h
Excavation width
4.200 - 6.000 mm
Excavation depth max.
1.200 mm
Installation height, gravel/sand max.
500 mm (PSS/FSS)
Installation height, track formation layer
300 mm
Material supply (backwards)
BA 255
Evacuation (to the front)
MFS 40/100
RC
Performance ø in 12 hours
400m
Max. performance per hour
60m
Ballast Excavation Chain - Capacity
135 cbm/h
Excavation width
4.000 - 4.400 mm
Subgrade Excavation Chain - Capacity
450 cbm/h
Excavation width
4.200 - 6.000 mm
Excavation depth max.
1.200 mm
Installation height, gravel/sand max.
500 mm (PSS/FSS)
Installation height, track formation layer
300 mm
Material supply (backwards)
BA 255
Evacuation (to the front)
MFS 40/100
The additional modules
of the PM 200-1
The cleaning module of the PM 200-1 BR and the crusher module of the PM 200-1 BR/C
